Behringer FLOW 8 Digital Mixer with Bluetooth Audio and Control
Share:
The FLOW8 features two XLR Midas-designed preamps with +48V phantom power, two combo XLR-1/4" mic/line inputs and four 1/4" line inputs with Hi-Z capabilities for incorporating a guitar or other instruments into the mix. There are two XLR main outputs and two 1/4" monitor sends. All channels feature a 4-band EQ and compressor, and 2 FX and 2 monitor sends. Monitor and main buses feature a 9-band EQ and a limiter. The two independent studio-grade effect engines provide 16 presets each and include reverbs, delays, and modulation effects.
FLOW 8 Overview
- Ultralow-noise high-headroom digital mixer with wireless remote control
- FLOW App for Bluetooth remote control from iOS/Android mobile phones or tablets
- 60mm channel faders and master rotary control with LED collar
- EZ-GAIN function analyzes the signals in your application and automatically sets the gain for optimum headroom
- Two Midas microphone preamps with 48V phantom power and programmable gain
- Two additional mic/line inputs on combo XLR/TRS jacks
- Two pairs of balanced stereo line inputs, each featuring a Hi-Z jack for direct connection of guitar/bass
- All channels with 4-band EQ and compressor, 2 FX and 2 monitor sends, while monitor and main buses feature 9-band EQ and limiter
- Two independent studio-grade effects engines, each with 16 presets including reverbs, delay, and modulation effects
- Built-in 10 x 2 channel USB computer audio Interface, with 48 kHz / 24-bit resolution
- Bluetooth audio streaming for adding click or backing tracks to your performance or for playing music during a break
- Balanced main outputs on gold-plated XLR and balanced monitor outputs on 1/4" TRS
- FLOW App with assisted set-up, unlimited mixer snapshots and intuitive, customizable Stage-View
- FX adjustment control, FX mute and tap tempo buttons
- Footswitch input for controlling FX mute / tap tempo or preset up/down functions
- Optional mic-stand adapter allows placing the mixer within reach of your performance (FLOW CLIP or P16-MB not included)
- USB powered via AC adapter (included) or power bank (not included)
- When you are interested in clean and healthy signals with low noise and low harmonic distortion, adjusting the right amount of preamp gain is paramount. It is defining the amount of amplification a signal gets when entering the mixer. Since source signals can be anything from a strong hit on the snare drum, to the subtle hum of bees, there is not one gain that fits all possible purposes.
- Gain staging is always a compromise and finding the right one requires either experience and technical knowledge, or the new FLOW 8 EZ-GAIN feature. The function can monitor signals on one or all channels at the same time, until you think the loudest sounds have been put to it. EZ-GAIN will then automatically adjust the channel gain to the optimum headroom.
- EZ-GAIN will automatically engage the 48V phantom power on mic inputs 1 or 2 when no signal is detected, just in case you forgot to do that.
- Let’s face it, small mixers are more often placed where cables end, rather than in a position where it would be most useful for controlling the mix. You may have to stretch out to control levels or walk away from the mixer to judge if your adjustment has the desired effect—no longer.
- FLOW 8 mixers offer full remote control from basically any Android or iOS device, giving you the freedom to go exactly where the sound is ideal for making any sort of adjustment. Tweak the 9-band EQ for the main PA speakers, set the compressor on the bass guitar, or adjust the mix for the talents onstage.
Are you new to the world of audio and not sure which signal to put on different inputs? Don't know how to use the EQ or compressor for dedicated signals? No problem. The FLOW 8 app provides you with a unique setup wizard that takes you step-by-step to make your music shine. After selecting the type of input, the assistant will offer you presets and tell you where to plug the cables in. Thanks to this innovative feature you can add your instruments and microphones no matter your skill level.
Total Recall of All Settings
FLOW 8 is your permanent companion for various audio applications, where you need a perfectly tweaked preset available on your fingertips within seconds. The integrated snapshot library and the possibility to store unlimited snapshots per FLOW 8 app gives you instant unlimited power. Store, edit, and load mixer settings via the hardware or app instantaneously. You can trigger snapshot loading with a connected footswitch to bring your performance to life. The FLOW Mix app recall allows you to load FX, channel, main, monitor, or routing options separately. While the hardware provides 15 internal storage slots for snapshot presets, the app can store an unlimited library of snapshots sorted by name, date, and time.
Outstanding Audio Quality on the Go
With two Midas microphone preamps and internal 32 VFP-Processing, FLOW 8 joins the X32, X-AIR, and WING series of digital mixing consoles. Even though the form factor and number of I/O are specifically tailored to smaller setups, each individual channel offers crystal-clear audio and keeps up with the sound quality. All channels offer 4-band parametric EQ, compression, 2 FX, and 2 monitor sends. All the monitor and main buses feature 9-band parametric EQ and a limiter for preventing unexpected volume peaks.
Looking for that Big Sound?
- FLOW 8 features two independent studio-grade effects engines, each with 16 presets for refining your instruments and vocals with breathtaking effects, sounds, and depth.
- 12 reverb programs span from a very short yet lively ambience to very long and smooth temple or stadium simulations. All of them come in two flavors, and their decay time can be adjusted continuously. In addition to that, you will get various delay and modulation effects for all styles and applications.
- Since compact loudspeakers are dominating the consumer market, Bluetooth has established itself as a standard for audio-connections in the consumer world. Mini-jack sockets are being replaced and many smartphones and tablets require special adapters to output analog audio signals. Therefore, FLOW 8 offers an integrated Bluetooth receiver, that enables you to comfortably play music in between performances without annoying adapters and the need of being close to the mixing console all the time.
- The BT audio connection for playing audio back can be connected independently from the FLOW 8 remote application. While using BT Audio for playback on one mobile device, BT LE can be used separately on another device for the control application.
- The optional FLOW 8 Clamp is based on the original TC Helicon Perform Series side-cap design, which uses a special material that combines extreme longevity and a dependable firm connection with the mic stand. It consists of a metal bracket that is screwed to the mixer, and a proprietary plastic part that clips on to the mic stand without any screws. You can choose to mount the clamp to the bracket in 3 angles (0, 15, or 30°) depending on your preferred mixer orientation.
- The FLOW 8 Camp is designed to bring your FLOW 8 mixer within reach during your performance. Onstage for a small club gig or in a recording setup, the best place will often be right at your microphone stand. It avoids unnecessary cable clutter and keeps the control surface of your FLOW 8 mixer permanently accessible. The clamp is designed for standard 5/8” microphone stands with a diameter (not exceeding 16.5mm).
- The internal USB interface offers separate modes for streaming and recording applications, providing up to 10 recording tracks and 4 playback channels. Either the main mix or all input signals can be streamed or recorded individually. This makes FLOW 8 the ideal partner for DAW home recording with zero-latency monitoring, streaming, and podcasting. No additional USB audio interface required. All Input signals and the Main stereo mix can be sent to audio applications on a Mac-, Windows- or Linux-based system for recording, editing, or streaming.
- Whether you’re a singer-songwriter, small ensemble, teacher, presenter, gamer, podcaster, or video blogger, producing at home, playing live in bars, café houses, or on the street, when practicing or performing, FLOW 8 will ensure impeccable audio quality and help you create amazing sound with ease.
Box Contains
-
Behringer FLOW 8 Digital Mixer with Bluetooth Audio and Control
- 1 x USB Power Adapter
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Easy 30 Day Return Policy
If you are dissatisfied with your purchase for any reason, you may return it to Kellards within 30 days of the purchase date, subject to the conditions and exclusions below.
You may initiate a return or exchange by requesting an RMA at sales@kellards.com.
Securely affix your return label to the outside of the shipping package. Return shipping fees are the responsibility of the customer. We recommend you ship via insured ground service with a tracking number. We cannot be responsible for lost packages.
Return Address
Kellards Return3237 Greenpoint Ave.
Long Island City NY 11101
Eligibility Conditions
Please read conditions below. If all conditions are not met, Kellards reserves the right to refuse the return or to charge a minimum 15% restocking fee. All returned items must be in new condition, in their original unaltered box (including an intact UPC code) and must include all packing material, blank warranty cards, manuals and accessories. Kellards can only refund the original purchase price. Shipping and handling fees are nonrefundable.
Nonreturnable Items
- Electronic software downloads
- Opened consumable items (e.g., film, tapes, paper, bulbs, CD, DVDs, ink cartridges, etc.)
- Underwater equipment that has been submerged
Defective or Damaged Items
Defective items may be repaired, exchanged or refunded at our discretion for the same model or manufacturer's equivalent model.
Exchanges
Please allow 3-5 business days for mail-in exchanges to be processed.
Refunds & Credits
Once we receive and inspect your item(s), we will credit your account. Please allow 5-7 days for a credit to appear on your account. In most cases, we will issue your refund in the same way you made the original purchase.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
